Building deployment times

[HMS Enterprize]

Ive noticed in games that anyting you build, airbase, radar etc seem to take forever to come up to full spec once you deploy it to a province.

Is there code in the files somewhere that controls this that Im missing? Or what factors determine deployment speed?

Cheers in advance.

Also, a while back I asked about controling how the AI deploys units in corps size, which I still do not know the answer to.

 

[quintelosky]

Hi

''what factors determine deployment speed?''
If you are playing with the option : 'Regain buildings uses IC reinforcement', you will need use ic in reinf. slider for the building. Reinf. slider at the 100%, deployment speed is normal, at the 50% ->50% speed, 0%->0.05% speed (minimum)
Remember, infra is an important factor

You can uncheck the option and play like the original

About units
Depends on many factors: provinces, divisions, fronts,...

 

[HMS Enterprize]

Hi

''what factors determine deployment speed?''
If you are playing with the option : 'Regain buildings uses IC reinforcement', you will need use ic in reinf. slider for the building. Reinf. slider at the 100%, deployment speed is normal, at the 50% ->50% speed, 0%->0.05% speed (minimum)
Remember, infra is an important factor

You can uncheck the option and play like the original

About units
Depends on many factors: provinces, divisions, fronts,...

Of course, cheers, I forgot about that.

I still cant find anything that seems to be controlling how the AI groups its units. There are plenty of commands in the AI files that direct where to place units (or their variables) but I cant see anything that says put x units under the command of 1 general. (I am seeing single divisions commanded by a full general for example)