I'm really sure this already has been suggested elsewhere...
I'd like to get a tier 1 programmable spltter/merger with tier 3 science packs in line with freight elevators.
The tier 1 splitter/merger should be transfer up to 320 items/min comparable to the elevator (tier 2 conveyor).
The tier 2 splitter/merger should be transfer at the same rate like the tier 2 elevator. Maybe it should be build with processors too.
If possible they should allow to filter in-/outputs. (sorter)
In an ideal world I should be allowed to set a maximum transfer rate for an easier production line management. (rater/limiter)
Only programmable systems might be used to be remote controlled from a production management screen. Maybe you need some transmitters/receivers in addition to remote control production lines not directly connected with low voltage foundations.
So you have to change the splitters/mergers in your lines, if you like them to be remote controlled by the production management screen.
I'd like to get a tier 1 programmable spltter/merger with tier 3 science packs in line with freight elevators.
The tier 1 splitter/merger should be transfer up to 320 items/min comparable to the elevator (tier 2 conveyor).
The tier 2 splitter/merger should be transfer at the same rate like the tier 2 elevator. Maybe it should be build with processors too.
If possible they should allow to filter in-/outputs. (sorter)
In an ideal world I should be allowed to set a maximum transfer rate for an easier production line management. (rater/limiter)
Only programmable systems might be used to be remote controlled from a production management screen. Maybe you need some transmitters/receivers in addition to remote control production lines not directly connected with low voltage foundations.
So you have to change the splitters/mergers in your lines, if you like them to be remote controlled by the production management screen.
Last edited:
Upvote
0