• We have updated our Community Code of Conduct. Please read through the new rules for the forum that are an integral part of Paradox Interactive’s User Agreement.
Showing developer posts only. Show all posts in this thread.
You say you updated your "motherboard drivers"
Do you mean the CMOS (BIOS) ?
 
So it is just HOI that give syou this error message?

If so wipe it from your system and try a reinstall.
 
You should never have an unknown device in your system, unless you know what it is and did it on purpose.
 
Just to be clear, you reformatted and it still does not work?
 
Okay keep us posted.
 
Hate to say it may be a hardware unit that has gone bad. Either the Disk controller, the cables or the Hardrive.

Do you only get this error when you try to run HOI or does it happen any other time?
 
That file should be located here:
C:\WINDOWS\OPTIONS\INSTALL\WIN_20.CAB
 
Well the CAB I looked up was for ME since I thought that was what you were still on.
 
I think what I would recommend is taking the system in to an experiance tech and letting them take a look at the Hardware/Installation.
 
As jpd mentioned "...the VDD VxD driver is responsible for the data transfers from and to your hard drive on your Windows 9.x installation."

So I would back up anything you value from your HD.
 
Thanks as always jpd.

just a note that for the memory test from floppy drive, it may involve going into CMOS (your BIOS setup) and changing the boot order to A,C from the usual C,A.
 
Happy Swiming
 
Jumbo Wilson said:
I too have a problem. Thankfully not technical.

Playing UK. I have taken military control over Canada, SA, Aus, NZ and Free France. Can I get the buggers on to transports? No. Their own and mine do not seem to be good enough. I have about 16 Divisions available in Canada which would be really useful right now. Japan has just DOW'd and I really need some of those Aussies in Malaya to surrender alongside my Brits and Indians.

Any ideas?

Jumbo
If it is not technical why are you posting the question in this forum!
Post it in the general discussion forum.
Posting in this forum is against board rules.

In addition Start your own thread, Hijacking of a thread is a serious breach of the rules.
As you are new to this board this is not an official warning, rather I suggest you read the board rules http://forum.paradoxplaza.com/forum/faq.php?faq=vb_faq#faq_new_faq_item
And welcome to the forums.
 
Glad it worked out.