Description
The suspenison shields from the pre-ftl dlc do NOT work as of their shield hardening. Canis Minor v3.7.2 (e793); build ID: 3a453a7a039
Game Version
Canis Minor v3.7.2 (e793); build ID: 3a453a7a039
What version do you use?
Steam
What expansions do you have installed?
Do you have mods enabled?
No
Please explain your issue is in as much detail as possible.
Mods are completely disabled, all DLCs are unlocked on steam current 2023_03_18 up to date issue.
When you have a shield hardener, they are practically not working from suspenion shields. The below video linked when completely seen will provided the needed information. The test was done with disruptors against the shields, and the regular shield hardeners work, BUT the shield hardening form suspension shields do not. In the tests, I made 3 test juggernauts:
1. juggernaut: has 4 shield hardeners, this is how it is supposed to work without the 4x25% installed.
2. juggernaut: has 0 shield hardeners, this is where it can be seen that the only reason it is not damaged well, is because of the nanites.
3. juggernaut: has 2 shield hardeners, this is where it can be seen that the utility slot ones work, but the ones in shield slots do not.
By suspension shields, I mean the shields that require artifacts, etc. the yellow ones in the video.
Steps to reproduce the issue.
Equip suspension shields and go against a disruptor or any fleet that has shield penetration, if it penetrates it, it doesn't work.
Upload Attachment
File(s) attached
The suspenison shields from the pre-ftl dlc do NOT work as of their shield hardening. Canis Minor v3.7.2 (e793); build ID: 3a453a7a039
Game Version
Canis Minor v3.7.2 (e793); build ID: 3a453a7a039
What version do you use?
Steam
What expansions do you have installed?
Do you have mods enabled?
No
Please explain your issue is in as much detail as possible.
Mods are completely disabled, all DLCs are unlocked on steam current 2023_03_18 up to date issue.
When you have a shield hardener, they are practically not working from suspenion shields. The below video linked when completely seen will provided the needed information. The test was done with disruptors against the shields, and the regular shield hardeners work, BUT the shield hardening form suspension shields do not. In the tests, I made 3 test juggernauts:
1. juggernaut: has 4 shield hardeners, this is how it is supposed to work without the 4x25% installed.
2. juggernaut: has 0 shield hardeners, this is where it can be seen that the only reason it is not damaged well, is because of the nanites.
3. juggernaut: has 2 shield hardeners, this is where it can be seen that the utility slot ones work, but the ones in shield slots do not.
By suspension shields, I mean the shields that require artifacts, etc. the yellow ones in the video.
Steps to reproduce the issue.
Equip suspension shields and go against a disruptor or any fleet that has shield penetration, if it penetrates it, it doesn't work.
Upload Attachment
File(s) attached
